4-2 KL701
INTRODUCTION
WARRANTY REGISTRATION
The Delivery and Warranty Registration forms must be
lled out and signed to validate your warranty protection.
The items on the form under "I hereby Acknowledge"
should be read and understood. The terms and conditions
of the warranty on this machine are specied in the front
of this manual.
SERIAL NUMBER AND LOCATION
The serial number is important information about the
machine and it may be necessary to know it before
obtaining the correct replacement part. The serial number
is located on the right side of loader sub-frame. The
serial number should be recorded on the Delivery and
Registration form and also below for your reference.
The purpose of this manual is to assist you in maintaining
and operating your DAEDONG loader. Read it carefully,
it furnishes information and instructions that will help you
achieve years of dependable performance. Some infor-
mation may be general in nature due to unknown and
varying conditions. However, through experience and
these instructions, you should be able to develop operat-
ing procedures suitable to your particular situation.
"Right" and "Left" as used throughout this manual are
determined by facing the direction the machine will travel
when in use.
The photos, illustrations and data used in this manual are
current at the time of printing, but due to possible in-line
production changes, your machine may vary slightly in
detail. The manufacturer reserves the right to redesign the
machine as may be necessary without notication.
DAEDONG KL701 Loader serial number information
Date purchased
Loader serial number
Dealer name and telephone number
Illustrations used in this manual may not show all
safety equipment that is recommended to ensure safe
operation of tractor and loader. Refer to the Safe-
ty Precautions section of this manual for information
concerning safety. Consult your dealer for further in-
formation.
IMPORTANT
To Next Page
Loading...
