KP310V1.0 Controller Operation Manual
- 4 -
maintenance, and reset it.
5 In the “Fuel Filter Running Time” mode, press
for 5 seconds, it will clear alarm of fuel
filter maintenance, and reset it.
6 In the “Air Filter Running Time” mode, press
for 5 seconds, it will clear alarm of air filter
maintenance, and reset it.
7 In the “Running Time” mode, press
for 5 seconds, it will clear running time, and reset it.
8 Press
and for 5 seconds until the signal twinkles, which shows that system has
blocked some protection functions (over/under frequency, over/under voltage); then press
and
for 5 seconds until the signal stop flickering, which shows that system has restored the
protection functions (over/under frequency, over/under voltage).
To Next Page
Loading...