New：Add new channel information, repeater will create new channel configuration files, a default
analog channel, and set the default configurations,
Open: Open a configuration file that saved in the storage device.
Save: Save the current channel configuration, in order to open the file conveniently next time.
If a new created channel or a channel read from the repeater, when saving them, you need to
select a new save path (similar with ―save as‖).
Save as: Select a new path to save the current configuration file.
Exit: Exit the software, if the configuration file has not been saved, software will ask user to save it.
3.5.2 Model Menu
Model Type: to select a model type, which includes the frequencies of 136MHz-174MHz,
400MHz-470MHz or custom frequency. The custom frequency cannot exceed the range of the
frequencies the repeater provides.
3.5.3 Edit Menu
General Setting
Device ID：Sets an individual ID that uniquely identifies the radio. In the Multiple Site IP system,
this ID is used to uniquely the different repeater.
Working Mode：Now, it only supports working in the single site.
To Next Page
Loading...
Need help?
General
