49
6.1.3 Changing Oil Filter
Element - Spin On Type
6.1 Lubrication System 6. Service & Maintenance
* Remove the filter cartridge by rotating
it anticlockwise with commercial tool.
* Collect dripping oil in a tray.
* Destroy the removed cartridge.
* Clean sealing surface of filter carrier
rim.
* Apply light film of oil to rubber seal of
new cartridge.
* Assemble the new cartridge by
rotating it clockwise.
* Sealing gasket of cartridge be hand
tight.
* Tighten the oil filter cartridge with
another half - turn using commercial
tool.
* Check oil level, see 6.1.2
* Check oil pressure, see 3.3.1
* Check cartridge seal for leaks.
Beware of burns from hot oil.