6.2 Engine Oil Change Procedure
Place MINT on flat surface, remove sump drain plug & engine oil filler cap / dipstick.
Drain the old/ used oil and collect it in a container while the engine is warm to assure rapid
and complete draining.
After complete oil drain out, tighten the drain plug securely.
Fill recommended, new engine oil to the outer edge of the oil filler hole. Use funnel to avoid
oil spilling.
Reinstall oil filler cap & tighten.
After completing the process, start engine for 2-3 minutes for complete oil circulations.
.,5/26.$52,/(1*,1(6/,0,7('
$.LUORVNDU*URXS&RPSDQ\
To Next Page
Loading...
