KL1000 - 2017 Programming and Operating Instructions
Codes - The Basics
• The KitLock has four code levels available:
i﴿ Master Code
ii﴿ Sub‐Master Code
iii﴿ User Code
iv﴿ Technician Code
• The KitLock is supplied with two factory set codes:
Master Code: 11335577
User Code: 2244
• When fitted, immediately change
the Master Code and User Code.
• All Master Codes and Sub‐Master Codes are 8 digits long.
• All User Codes are 4 digits long.
• All Technician Codes are 6 digits long.
• The lock ‘open’ time is set at 4 seconds.
Functions
Before programming, select the most appropriate function for the application: A﴿ or B﴿ ‐ See special Master Code set up commands.
A﴿ PRIVATE USE Important Note: This is the default function and is already pre‐programmed in new locks.
This is the most common function and is used where the same code will be repeatedly used.
B﴿ PUBLIC USE
The user enters their own personal four‐digit code.
This locks the lock. The same code is entered once only to open the lock before being erased and ready for the next new user.
This function is used for short term, multi occupancy applications, e.g. a locker in a leisure centre.
Operating Instructions
Note: The KitLock has a 10 button keypad and a # button.
The # button is hidden beneath the handle when in the locked position.
Views: 495
To Next Page
Need help?
General