KIT CO.,LTD.
31
User’s Manual
ⓐ State
Shows the MAC address of the device that you are directly
connected to.
ⓑ Refresh
Click “Refresh” to scan for the Powerline adapter that is
connected directly to your computer.
ⓒ Connect
When there are multiple Powerline adapters connected
directly to your computer, you can select the device you
would like to configure by highlighting it in the device window
and click “Connect”.
ⓓ Link Quality
Shows the signal strength of the related powerline products.
This is a “snapshot” of the signal strength at the time if the
scan. Pressing the “Refresh” ⓑ button may get a different
result.
☞ Note : You will receive a poor link quality when using
only adapter.
To Next Page
Loading...