KIT CO.,LTD.
7
User’s Manual
2-4. Hardware Installation
☞ You will need at least two powerline adapters to create
a network connection.
☞ Connecting the Ethernet Bridge to a router, network printer
or other networked device.
If the Powerline device is going to be connected to
something else than a computer, such as a Router, Broadband
modem, etc., no software needs to be installed. Simply plug the
Powerline Ethernet adapter into a LAN port of the other
network device and insert the Powerline Ethernet adapter in
an AC socket. No further installation is needed for this device.
1. Installing and Setting Up the Powerline Ethernet adapter
ⓐ Install the software FIRST.
ⓑ Connect the Adapter directly into the wall outlet.
ⓒ Do not connect the Adapter into a power strip or surge
protector since these devices may contain circuit filters,
which may degrade the powerline signal.
ⓓ Connect the powerline ETHERNET cable to your PC.
ⓔ Let Windows finish installing the Adapter
To Next Page
Loading...