Kitables USB CHARGER User Manual

USB CHARGER
kit instructions
®

Kitables USB CHARGER Specifications

General

Output Voltage	5V DC
Connector Type	USB-A
Ports	1
Compatibility	USB Devices
Safety Features	Short Circuit Protection

Summary

Getting Started

Tools Needed

Lists essential tools required for assembling the USB charger kit.

Initial Assembly and Wiring

Box Construction

Instructions for assembling the laser-cut wooden box components.

First Wire Connections

Connect battery wires to the Micro USB charging module.

Battery Charging Module Setup

JST Connector Integration

Details on connecting the battery's 2-Pin JST to the charging module.

Module to Booster Connectivity

Charging Module Output Wiring

Solder wires from charging module OUT+ and OUT- terminals.

USB Booster Input Wiring

Connect charging module output to USB Booster IN+ and IN-.

Switch Installation and Wiring

Switch Mounting

Guides on fitting the switch into the box cutout.

Switch Electrical Connections

Solder wires from booster and module to switch pins.

Functional Testing and Securing

Pre-Assembly Testing

Test charging module and USB Booster functionality.

Component Gluing

Secure USB Booster and Micro USB ports within the box.

Final Assembly and Operation Check

Battery Positioning

Carefully place the battery inside the box.

Final Checks and Box Closure

Verify operation and secure the top of the box.

Diagrams and Usage Guide

Circuit Wiring Diagram

Visual schematic of all circuit connections.

Charging and Powering Devices

Instructions for charging the battery and powering connected devices.

Project Completion and Support

Kit Completion Confirmation

Acknowledges successful completion of the Kitables Kit.

Support and Resources

Provides links to FAQ and contact information.