KitchenAid 5KPM5 - KitchenAid Stand Mixer Safety; Important Safeguards

ENGLISH
7
PRODUCT ASSEMBLY
Turn the Stand Mixer to OFF (0) and then
unplug.
1
To attach the Bowl: Place Bowl Lift Lever
in down position. Fit bowl supports over
Locating Pins. Press down on back of bowl
until bowl pin snaps into spring latch.
3
Spring latch
Locating pin
To Attach the Accessory: Slip Flat Beater
on Beater Shaft and press upward as far
as possible. Turn beater to right, hooking
beater over the pin on shaft.
4
Pin
Rotate lever to straight-up position.
Bowl must always be in raised, locked
position when mixing.
5
Place Bowl Lift Lever in down position.
2
W11456999A_01_EN.indd 7W11456999A_01_EN.indd 7 12-08-2020 14:32:4512-08-2020 14:32:45