8
ASSEMBLING THE BLENDER
Before rst use
Before using your Blender for the first
time, wipe Blender base with a warm
damp cloth, then wipe clean with a damp
cloth. Dry with a soft cloth. Wash pitcher,
lid, and ingredient cup in warm, sudsy
water (see “Care and cleaning” section).
Rinse parts and wipe dry.
Before using the Blender, plug into
an earthed outlet.
Using the Blender
Before use
Before operating the Blender, make sure
the pitcher is properly locked into the
blender base.
The Blender will not run if the pitcher and
lid are not fully in place. If you pull the
Blender out of the base before the Blender
stops running, the blade brake will kick in to
stop the blades, and the Blender will stop
after a few seconds.
The Blender has four preset recipe programs:
Icy Drinks/Smoothies, Milkshakes, Soups/
Sauces, and Juice. It also features Variable
Speed and Pulse selections that allow you to
customise your blending for any recipe you
make. See “Blender function guide” for more
detailed information.
Preparing the Blender for use
OPERATING THE BLENDER
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
W10810095C_01_EN.indd 8 11/8/16 1:56 PM
To Next Page
Loading...
