English
11
ASSEMBLING THE SPARKLING BEVERAGE MAKER USING THE SPARKLING BEVERAGE MAKER
Making sparkling beverages
2
To insert bottle, make sure that the
carbonation lever is in its fully upward
position and the bottle loading lever is
angled forward. If not angled forward,
pull it toward you until it clicks. Do not
pull carbonating tube.
1
Rinse the carbonating bottle before use.
Prior to making sparkling water, fill bottle
with water up to the fill line. For best
results, carbonate chilled water. To avoid
product damage, carbonate water only.
1
2
3
Insert bottle neck into the snap-lock. Firmly
push bottle up and back. The snap-lock
mechanism will catch the bottle firmly.
4
Carbonate in short pulses by pulling the
carbonation lever down firmly and then
allowing the lever to return to a middle rest
position before repeating. Continue until
the desired level of carbonation is achieved.
Do not move the Sparkling Beverage Maker
during the carbonation process.
WARNING: Do not carbonate an empty bottle.
W10624164A_FINAL.indd 11 7/2/14 9:13 AM
To Next Page
Loading...
