To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid ISLAND CANOPY and is the answer not in the manual?
General| Width | 30-in, 36-in, 48-in |
|---|---|
| CFM | 400 CFM |
| Lighting | LED |
| Filter Type | Baffle |
| Venting Type | Ducted |
| Material | Stainless Steel |
| Number of Lights | 2 |
Instructions to reduce risks of fire, electric shock, and injury during operation and maintenance.
Cautionary advice against using the hood for hazardous or explosive materials.
Instructions on proper venting to prevent fire risk and ensure correct air exhaust.
Warning about using only metal ductwork to reduce fire risk.
Safety measures to prevent and handle range top grease fires.
Actions to take to reduce injury risk during a grease fire.
Warning against using the fan with solid-state speed control devices.
Lists necessary tools and parts required for installation.
Guidelines for non-vented installations where outside venting is not possible.
Illustrates roof venting configurations for vented and non-vented systems.
Explains how to calculate the required vent system length using equivalent feet.
Instructions for connecting aluminum wiring safely.
Requirements for wire sizes and connections based on electrical codes.
Steps to prepare the installation area, including clearance and mounting.
Details on marking and drilling pilot holes for mounting the hood.
Steps for preparing power supply cable, wiring, and cutting holes.
Instructions for assembling and attaching the range hood assembly.
Steps for installing the vent system and connecting the duct.
Specific steps for installing the hood in a non-vented configuration.
Warnings and instructions related to electrical connections and shock hazards.
Specific instructions for grounding the blower motor.
Instructions for attaching the vertical supports for duct covers.
Steps for installing the upper duct covers.
Instructions for attaching lower duct covers with brackets.
Steps for installing charcoal filters for non-vented setups.
Instructions for installing the metal grease filters.
Verification steps for the blower and light operation after installation.
Overview of the range hood's control panel buttons and functions.
Explanation of the display indicators and their meanings.
Information on the grease filter saturation alarm and how to reset it.
Details on the charcoal filter saturation alarm and reset procedure.
How to activate or deactivate the audible signal for the hood's functions.
Method to include or exclude the charcoal filter for alarm functions.
Explanation of the heat sensor feature and its automatic fan speed adjustment.
Instructions on how to operate the hood's lighting.
How to set and use the built-in timer function.
Explanation of fan speed control buttons and their functions.
How to decrease fan speed or turn the fan off.
How to activate the timed fan off feature.
General cleaning instructions for the hood and its parts.
Specific advice for cleaning the exterior surfaces without damage.
Recommended cleaning agents and methods for the hood.
Instructions for cleaning and reinstalling the metal grease filters.
Step-by-step guide for replacing the charcoal filters.
Instructions on how to safely replace the halogen lamps.
Identifies the electronic user interface component.
Identifies the electronic power board component.
Details the specifications and resistance of the motor.
Guidance on ordering factory-specified replacement parts.
Contact information and resources for assistance in the USA.
Instructions on how to write to KitchenAid for additional support.
Lists available accessories like charcoal filter and extension kits.
Contact information and resources for assistance in Canada.
Details the terms and duration of the limited warranty.
Lists specific items and conditions not covered by the warranty.
Legal disclaimers regarding implied warranties and remedies.
Advice on keeping documentation for warranty service.
