EasyManua.ls Logo

KitchenAid KDRP407HSS4 - User Manual

KitchenAid KDRP407HSS4
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
I Ilation instructions
mmercial
[]
eaneng
for residential useonly
backguard
(requiredfor someinstallations)
Tip Over Hazard
A child or adult can tip the range
and be killed.
Connect anti=tip bracket to wall
behind range.
Reconnect the anti-tip bracket, if
the range is moved.
Failure to follow these instructions
can result in death or serious
burns to children and adults.
I_Jtchen_kid _
FOR THE WAY IT'S MADE _
Questions regarding features,
operation, performance, parts or
service? Call 1-800-422-1230 or visit
our web site at www.kitchenaid.com.
iMPORTANT:
Readandsave these
instructions.
IMPORTANT:
Installer: Leave Installation
Instructions with the homeowner.
Homeowner: Keep Installation
Instructions for future reference,
Save Installation Instructions for local
electrical inspector's use.
Write down the model and serial numbers
before installing range.
Both numbers are on the model/serial
rating plate, located on the surface below
the control panel.
Model #
Serial #
Part No. 4455927 Rev. A
Question and Answer IconNeed help?

Do you have a question about the KitchenAid KDRP407HSS4 and is the answer not in the manual?

Summary

Installation Safety and Preparation

What to Do If You Smell Gas

Immediate actions to take and who to contact if a gas leak is detected.

Installation Parts and Dimensions

Parts Supplied for Installation

Details of components provided for installing the range, including anti-tip hardware.

Product Dimensions

Overall measurements of the KitchenAid dual fuel range, including height, width, and depth.

Cabinet Opening Dimensions

Required cutout sizes and clearances for installing the range into kitchen cabinets.

Gas Supply Requirements

Local Codes and Ordinances Compliance

Ensuring installation adheres to local codes, ordinances, and national fuel gas standards.

Elevation Impact on Input Ratings

How altitude affects gas input ratings for the range.

Gas Type and Conversion

Information on the range's gas type (Natural/LP) and conversion procedures.

Gas Supply Line and Shutoff Valve

Requirements for the gas supply line, including pipe size, connectors, and shutoff valves.

Regulator and Pressure Testing

Details on regulator checks and line pressure testing procedures.

Electrical Requirements and Installation Steps

Electrical Supply Specifications

Requirements for the electrical supply, including voltage, amperage, and wiring.

Grounding and Wiring Methods

Guidelines for proper grounding and connection methods for the range's electrical supply.

Range Installation Procedure

Step-by-step instructions for moving and positioning the range into its final location.

Leveling the Range

Instructions on how to level the range using adjustable feet for proper operation.

Anti-Tip Bracket Installation

Tip Over Hazard Warning

Critical safety information regarding the risk of tip-over and how to prevent it.

Mounting the Anti-Tip Bracket

Detailed steps for securely attaching the anti-tip bracket to a wall stud.

Electrical Connection and Testing

Connecting Range to Junction Box

Steps for connecting the range's power cable to the house junction box.

Grounded vs. Ungrounded Neutral

Instructions for making electrical connections based on grounded or ungrounded neutral configurations.

Final Assembly and Burner Adjustment

Attaching Backguard or Island Trim

Instructions for attaching the backguard or optional island trim.

Making Gas Connection

Steps for connecting the flexible gas connector to the range's regulator.

Testing Gas Connections

Procedure for testing all gas connections for leaks using detergent and water.

Cooktop Burner Installation

Properly placing the cooktop burner caps and grates on the burner bases.

Adjusting Top Burner Flames

How to adjust the cooktop LOW burner flame to the correct height and color.

Oven Operation and Troubleshooting

Checking Oven Element Operation

Steps to verify the proper functioning of the oven's bake and broiler elements.

Oven Not Operating Troubleshooting

Basic checks to perform if the oven is not working, including power and gas supply.

Installer Checkoff List

A checklist for installers to confirm all installation steps and requirements are met.

Summary

Installation Safety and Preparation

What to Do If You Smell Gas

Immediate actions to take and who to contact if a gas leak is detected.

Installation Parts and Dimensions

Parts Supplied for Installation

Details of components provided for installing the range, including anti-tip hardware.

Product Dimensions

Overall measurements of the KitchenAid dual fuel range, including height, width, and depth.

Cabinet Opening Dimensions

Required cutout sizes and clearances for installing the range into kitchen cabinets.

Gas Supply Requirements

Local Codes and Ordinances Compliance

Ensuring installation adheres to local codes, ordinances, and national fuel gas standards.

Elevation Impact on Input Ratings

How altitude affects gas input ratings for the range.

Gas Type and Conversion

Information on the range's gas type (Natural/LP) and conversion procedures.

Gas Supply Line and Shutoff Valve

Requirements for the gas supply line, including pipe size, connectors, and shutoff valves.

Regulator and Pressure Testing

Details on regulator checks and line pressure testing procedures.

Electrical Requirements and Installation Steps

Electrical Supply Specifications

Requirements for the electrical supply, including voltage, amperage, and wiring.

Grounding and Wiring Methods

Guidelines for proper grounding and connection methods for the range's electrical supply.

Range Installation Procedure

Step-by-step instructions for moving and positioning the range into its final location.

Leveling the Range

Instructions on how to level the range using adjustable feet for proper operation.

Anti-Tip Bracket Installation

Tip Over Hazard Warning

Critical safety information regarding the risk of tip-over and how to prevent it.

Mounting the Anti-Tip Bracket

Detailed steps for securely attaching the anti-tip bracket to a wall stud.

Electrical Connection and Testing

Connecting Range to Junction Box

Steps for connecting the range's power cable to the house junction box.

Grounded vs. Ungrounded Neutral

Instructions for making electrical connections based on grounded or ungrounded neutral configurations.

Final Assembly and Burner Adjustment

Attaching Backguard or Island Trim

Instructions for attaching the backguard or optional island trim.

Making Gas Connection

Steps for connecting the flexible gas connector to the range's regulator.

Testing Gas Connections

Procedure for testing all gas connections for leaks using detergent and water.

Cooktop Burner Installation

Properly placing the cooktop burner caps and grates on the burner bases.

Adjusting Top Burner Flames

How to adjust the cooktop LOW burner flame to the correct height and color.

Oven Operation and Troubleshooting

Checking Oven Element Operation

Steps to verify the proper functioning of the oven's bake and broiler elements.

Oven Not Operating Troubleshooting

Basic checks to perform if the oven is not working, including power and gas supply.

Installer Checkoff List

A checklist for installers to confirm all installation steps and requirements are met.

KitchenAid KDRP407HSS4 Specifications

General IconGeneral
Cooktop SurfaceStainless Steel
Control TypeElectronic Touch
Self-CleaningYes
Convection OvenYes
Self-Cleaning OvenYes
Oven WindowYes
Color/FinishStainless Steel
Warranty1-year limited warranty

Related product manuals