4
Tools & Parts
INSTALLATION REQUIREMENTS
Tools Needed
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Pipe wrench
Adjustable wrench
or
5
⁄8" wrench
Z\, x 4
1
/4" flat-blade screw-
driver
#2 Phillips screwdriver
Drill
C\," drive ratchet
ZB\zn" combination wrench
Pliers
Level
Tubing cutter
Z\v", C\,", B\zn" nut drivers
Marker or pencil
C\zn" carbide tip masonry bit
Z\," drill bit
Pipe-joint compound
resistant to LP gas
Noncorrosive
leak-detection solution
Tape measure
For LP/Natural Gas
Conversions
Z\x" deep-well socket
Adjustable wrench
7 mm nut driver
Masking tape
To Next Page
Loading...
