Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws and shift tub. Tighten bracket screws.
If securing with a side attachment, check that sides of door do not
rub against the screw heads. If they do, dishwasher must be
re-centered. When dishwasher is properly centered, replace
plastic buttons.
If needed, see website for animated representation of this step.
Visit www.kitchenaid.com/anchoring under FAQ tab.
Compete Insta aton
Option A, Install Access Panel - Plastic Panel
Reinstall access panel and fasteners
Insulation
(or
Place the plastic access panel against the dishwasher leg.
Check that the lower edge of the access panel touches the floor.
Adjust if necessary.
Using a flat-blade screwdriver, turn the fasteners 1/4turn clockwise
to lock into place. The fasteners slot will be straight up and down
when properly locked.
24
To Next Page
Loading...
Need help?
General
