KitchenAid KDTM354ESS Installation Instructions

3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Tools Needed:
Other Useful Items You May Need:
Parts Supplied:
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230. In Canada, call
1-800-807-6777.
Other Parts Needed: (not provided)
Optional Accessory Parts Available:
First-time Installations:
Check local codes. Check existing electrical supply. See the
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.
Additional Tools Needed:
Additional Parts Needed (not provided)
NOTE: If using a flexible braided hose, replace inlet hose after
5 years to reduce the risk of hose failure. Record hose installation
or replacement dates on the hose for future reference.
†®TORX, T15, and T20 are registered trademarks of
Acument Intellectual Properties, LLC.
.

KitchenAid KDTM354ESS Specifications

General

Style	built-in dishwashers
Color	black
Load Capacity	15
Number of Cycles	6
Cycle Selections	express wash, light/china, normal, prowash, rinse only, tough
Options/Settings	1-24 hour delay, control lock, heated dry, hi temp wash, prodry, proscrub, sani rinse
Noise level	44 decibels adjusted
Delay Start	yes
Number of Racks	2
Water Filter	yes
Sanitize Settings	yes
Smart Home	no
Annual Energy Consumption	270 kilowatt hours
Voltage	120 volts
Current	15 amperes

Weight and Dimensions

Depth	24 3/4 inches
Height	34 1/2 inches
Width	23 7/8 inches
Net Weight	102.1 pounds