KitchenAid KES6551 - Care and Cleaning: Grinding System; Final Grinder Assembly and Cleaning

30
5.
Clean the chute by sticking the wire side of the Cleaning Brush through the chute from
either end to clean away any grounds or residue.
6. The Bean Hopper and bean hopper lid can be cleaned with warm, soapy water, then rinse
with clean water and dry with clean soft cloth.
7. Align the Top Burr back in place and twist clockwise to secure. Replace the Bean Hopper
and the lid.
NOTE: Make sure that water never comes into contact with the Burr Grinder system.