EN
41
WARNING LIGHTS
WARNING
PATTERN
PROBLEM CAUSE SOLUTION
Upper hopper is not
in position
Bean Hopper
not properly
inserted
Insert the Bean Hopper
using a clockwise
movement until lock and
bottom door is open.
No water
Water Tank is
missing
Position the Water Tank.
Water Tank is
empty
Fill the Water Tank.
Water Tank not
properly
inserted
Adjust Water Tank with
the nozzle.
No water flowing
Dry pump
Prime the pump. Refer
“Priming Pump
Instructions” section.
Coffee puck is
too dense
Reduce tampering
strength.
Overheating of
upper surface of the
appliance
Steam function
has been used
up to 5 minutes
Let the steam unit cool
down for 10 minutes.
All lights turn on
Motor overheat
Let the motor cool down
for 5 minutes (without
unplug).
All lights are turned
on, LED underneath
grind head is turned
on, and LED
underneath brew
head is turned on
Motor overload
Remove hard objectives
from the grind system.
All lights flashing
Heater overheat
Let the heater cool down
for 10 minutes with
unplug.
LIMITED WARRANTY AND SERVICE
KITCHENAID
®
SEMI-AUTOMATIC ESPRESSO MACHINE WARRANTY FOR THE 50 UNITED STATES, THE
DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA
This limited warranty extends to the purchaser and any succeeding owner for KitchenAid Semi-Automatic Espresso Machine operated
in the 50 United States, the District of Columbia, Puerto Rico, and Canada.
Length of Warranty: Two Year Limited Warranty from date of delivery.
To Next Page
Loading...
