EN
31
BREWING SYSTEM
1. Clean the Steam Wand after every use. Toggle the Mode Button to select Steam mode.
Position the Steam Wand over Drip Tray or into a cup. Press the
Brew Start/Stop Button (
), wait 2 to 3 seconds. Press it again to stop. Wipe down
Steam Wand exterior with a soft damp cloth.
2. Wash the Drip Tray, Portafilter, Filter Baskets, Milk Pitcher, and Drip Tray plate in warm,
soapy water and rinse with clean water. Dry with a soft cloth.
3. When the Drip Tray indicator rises and becomes visible above the surface of the Drip Tray
plate, empty the Drip Tray and rinse with warm water.
To Next Page
Loading...
Need help?
General
