EN
9
3.
Hold the Priming Pump in the vertical position.
4. Remove the Water Tank and insert the Priming Pump in the Water Tank connector.
5. With the machine plugged in but powered off, press and hold the Temperature Button for
3 seconds until the Power Button (
), Heating Light Indicator, Espresso, Steam, and
Hot Water mode setting lights turn on.
6. Place a container under the Group Head. Press the Brew Start/Stop Button ( ) to start
the priming operation, when the machine begins working, press the Priming Pump until
water comes out from the Group Head or Water Spout. If necessary, fill up the pump again
and repeat steps, turning off the machine in the meantime.
To Next Page
Loading...
