KitchenAid KMT4116 - Lift & See Feature Details; Toaster Care and Cleaning; Cleaning Procedures and Maintenance

12
TROUBLESHOOTING
SPECIAL TOASTING FUNCTIONS
IMPORTANT: The tray will be hot immediately following a toasting cycle. Allow Toaster to
cool before emptying the crumb tray.
NOTE: If grease or oil splatters on the
Toaster, wipe splatters away immediately
using a clean, damp cotton cloth.
CARE AND CLEANING
Lift & See
2
Press down on lift lever to lower the
toast back into the toaster.
1
Raise the lift lever any time during
the toasting cycle to view the
toast’s progress.
TIP: For smaller items, lift up on the lift
lever to raise toast above the top of the
Toaster.
With the Lift & See feature, you can check toasting progress without stopping the toasting cycle.
CARE AND CLEANING
2
Wipe Toaster with a soft, damp cotton
cloth. Do not use paper towels, abrasive
cleansers or liquid cleaning products. Do
not immerse Toaster in water.
1
Unplug the Toaster and let it cool before
cleaning.
W10739208A_EN_v11.indd 12 2/23/15 2:19 PM