KitchenAid KSM2FPA - Operating the Food Processor Attachment; Attaching to the Stand Mixer

11
English
INSTALLING THE DISCS OPERATING THE FOOD PROCESSOR ATTACHMENT
Attaching the Food Processor attachment to the Stand Mixer
2
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
For Stand Mixers with a removable attachment hub cover: Turn the attachment knob
counterclockwise to remove attachment hub cover.
1
Turn Stand Mixer OFF and unplug.
3
Insert the attachment into the
attachment hub. Rotate attachment
back and forth if necessary. The pin
on the attachment housing will fit
into the notch of the hub rim when
in proper position.
W10641290A_ENv13.indd 11 5/28/14 11:50 AM