ASSEMBLING THE EASY CLEAN JUICER
Before rst use
Assembling the Easy Clean Juicer parts
Your Easy Clean Juicer will come fully
assembled in the box. Before using your
Juicer for the first time, remove the pulp
container first, and then disassemble the
rest of the unit. The pulp container must
be pulled out from the juicer before the lid
can be removed. Once disassembled, wash
all parts and accessories either by hand or
in the dishwasher. See “Care and Cleaning”
section for more detail.
NOTE: This product is designed for
household use only.
IMPORTANT: Place Juicer on a dry, level countertop with the 2-speed dial facing you. Do not
plug in the Juicer until it is completely assembled.
Remove pulp container. Grasp the feed chute
on the Juicer lid and turn it counter-clockwise
to remove it from the Juicer.
1
Place the juicing bowl inside of
the bowl housing.
2
Adjust the pulp control collar to the
appropriate pulp setting for High,
Medium or Low pulp flow. To adjust,
push in button on collar and rotate
until you hear it lock into place at the
desired setting.
Low pulp
High pulp
Medium pulp
W10673583C_ENv01.indd 7 9/3/14 4:21 PM
To Next Page
Loading...
