Before operating your Easy Clean Juicer,
make sure the Juicer is assembled correctly,
and the adjustable pulp collar is set to the
appropriate pulp level for your recipe (see
“Assembling the Easy Clean Juicer”).
Plug the power cord into a grounded
3-prong outlet.
Making juice
1
Adjust the speed dial to the desired
setting. See the Speed Selector Table
in the “Tips for great results” section
for more information. Press (Power
button) to turn on Juicer.
2
With motor running, place food
into feed chute using the food pusher.
As food is processed, the extracted
juice will flow into the juice pitcher,
and the separated pulp will flow into
the pulp basket.
NOTE: Do not allow the pulp basket to overfill while juicing, as it may affect operation
of the Juicer.
To empty pulp basket while juicing, first turn off Juicer by pressing the Power button.
Once the power is off, remove the pulp basket and empty its contents. Make sure to
replace the empty pulp basket before turning power back on and continuing to juice.
TIP: To prevent drips to your counter, turn up the juice spout when removing
the juice pitcher.
W10673583C_ENv01.indd 9 9/3/14 4:21 PM
To Next Page
Loading...
