8 9
Troubleshooting
• If you cannot connect the headphones to your device, please try the following:
– Ensure that the headphones are charged, switched on, paired with and connected to your device
– Check the headphones are within 10 metres (30 feet) of your device and that there are no obstructions
(such as walls or other electronic devices) between the headphones and the device
– Only one device may be paired to these headphones at a time, so please ensure there are no conicting
wireless devices trying to connect to the headphones
• If the headphones will not switch o, they can be reset back to normal by putting them on charge
• If you receive an intermittent signal, please ensure the headphones are fully charged before continuing use
• If you do not use the headphones for longer than 3 minutes whilst not connected to a device, they will
automatically power o to conserve power
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything,
please feel free to contact us at: support@kitsound.co.uk
Specications
Works with Bluetooth®
Version V4.1
Wireless connectivity distance up to 10 m
Frequency response 20 – 20 kHz
Talk time up to 10 hours
Play time up to 10 hours
Charge time up to 2 hours
Standby time up to 300 hours
Battery type LiPo
Battery capacity 300 mAh
To Next Page
Loading...
