Please read carefully and make sure that you have fully understood the manual to ensure proper operation
and maintenance of the machine. Keep this manual in a safe place. If the unit does not operate normally, or
have any questions about its functions, please refer to the manual.
ATTENTION
Do not intervene by making changes in the operation mode of the unit for any reason
without the permission of the manufacturer. This may cause fire and electric shock
hazard.
Description of PELLET unit
Installation
Chimney installation
Electrical connection & thermostat connection
Room thermostat CTR-5700PLUS
Thermostat modes (heating,
timer, antifreeze, hot water)
12 Boiler control HOT-400N
13 Initial ignition
14 Pellet unit set-up
15 Remarks for the use of Pellet Fuel
16 Cleaning the combustion chamber / Markings
17-19 Code display on the screen
Damage identification and solutions
20 Specification table