Kiturami PELLET BOILER - Room Thermostat CTR-5700 PLUS

ROOM THERMOSTAT CTR-5700PLUS
Operation of the room thermostat CTR-5700PLUS
4
5
1
6
7
2
3
8
1. Multifunction display
2. Heating, timer and antifreeze mode button
3. Hot water mode button
4. Pellet unit power indicator
5. Buttons (+) / (-) (▲) (▼)
It is used for the configuration of settings in each unit
operation and the selection of room temperature.
6. Heating water temperature selection button.
With this button you set the heating water
temperature in the boiler.
7. Time adjustment button.
With this button you adjust the operating and pausing
times.
8. Power (ON/OFF)
With this button you open and close the thermostat
and simultaneously turn the power of the pellet unit
on or off. It is also used to restart the unit after
correcting some damage. (Number of restarts per
damage up to 3 times, restart the unit after 5
minutes).
8