Kitz F Series - Page 7

Document No.：KE-4010-11                                            Page: 4/58

6.  DesignSpecifications
 FA/FAS-1 FA/FAS-2 FA/FAS-3 FA/FAS-4 FA/FAS-5 FA/FAS-6
Shaftrotatingrange 90°±7°
Cylindervolume(Ｌ) 0.15 0.31 0.61 1.29 2.29 5.27
Standardoperationpressure 0.4MPa
Operationpressurerange*1 0.3〜0.7MPa
Housingshelltestpressure 0.97MPa
Valve opening position
indicator 
90°with7divisionmarksincluding[O]and[S] 
Service temperature range
*2
−20℃〜＋80℃
Bottompadformountingon
valves
ISO5211
*1.ContactKITZCorporationfortechnicaladvice,iftheoperatingpressureislowerthan0.4MPa.
*2.Theairsupplymustnotbefrozen.


7.  ProductIdentificationPlate

Fortheidentificationoftheproductcodeandserviceconditions,a metalplateisattachedtotheactuator
housing.

IDplateforFA-1actuator

IDplatelocation 








FA／FAS-1〜3
FA／FAS-4〜6