26 27
Implementation of measurement
1.
2.
See the readings
• V (voltage)
• A (current a ctual)
• A
MAX
(maximum current )
• W (absorbed power)
• W
MAX
(maximum power absorbed)
• A
OVERLOAD
/ W
OVERLOAD
(current value of overload
)
• Hz (Frequency )
•
(power factor cos )
E44395_Power meter_PT_IM_PRINT.indd 26-27
After entering the time and price of electricity
could initiate measurements.
Only connect the appliance to an earthed
socket 230 V,which has been properly
installed.
Now connect (s) the consumer (s) or the
consumer (via a plug casing) to meter the
costs of electricity.
Note that the total power of consumers
connected must not exceed 3680 watts.
The following values are displayed:
power value of the overload
To Next Page
