A/B Link
currently displayed
Touchstrip Operation on the Home Page
This menu allows the unit to be linked for stereo operation. Turn the right-hand encoder to select
linked or non-linked (mono) mode. Note that when linking, the channel
will be copied to the other channel, so that both channels are then identical. In other words, if the
“A” lamp is lit over the A/B select switch, then the settings for Channel A will be copied to
Channel B. If the “B” lamp is lit, the settings for Channel B will be copied to ChannelA.
In the home page, the touchstrip is inoperative. In the Marker sub-menu, the touchstrip can
be used to select which marker is currently active, and to drag the active marker to a new
frequency.
18
l abc
To Next Page
Loading...
Need help?
General
