Klarstein 10017162 - Placement and Installation; Power Supply

10
Power supply
• Make sure no damage in plug.
• Don’t use connector instead of plug.
•Insertplugintosocketrst,thenturnonsocketswitch,presskey“POWER”torunmachine.
Please safekeep this user’s manual.
Placement and Installation
Placement
• Placethemachineonatand
dry ground, and keep it far from
 aroundthingsatleast50cm.(g.1)
Installation
• Spinadapterintoexhaustpiperst,
then spin the exhaust pipe into exhaust
 connector(counter-clockwise)(g.2)
• Put adapter into window sealplate, adjust
window open width in order sealplate match
window well, and the length of sealplate
is adjustable.
Installation Errors
• Freeaccessofexhaustpipeisimportant,installationerrorswillbringbadinuence
 ofmachine.(g.3)
• Avoid exhaust-pipe with sharp bend.
• Make sure air in exhaust pipe can run smoothly .
(g.1)
(g.2)
8
9
(g.3)