Klarstein 10028129 - Troubleshooting and Error Indicator; Troubleshooting

Cleaning Suggestion
• DAILY CLEANING: The ice shovel, door and the water dividing pipe should be cleaned by yourself
per each day. At the end of every day, rinse the ice shovel and wipe the both sides of the door with
a clean cloth.
• SEMI-MONTHLY CLEANING: The ice shovel, ice bin, water tank, the ice-full detecting plate and
the surface of the evaporator are to be cleaned by yourself semi-monthly according to interior
cleaning program.
• SEMI-ANNUAL CLEANING: All the components & surfaces exposed to water or ice cubes, like
ice storage bin, water tank, door, evaporator, water pump, silicone tube, water dividing pipe, etc.
should be cleaned by Using Nu-Calgon Nickle Safe Ice-machine Cleaner per each 6 months. They
should be cleaned by the serviceman according to ice making assembly system cleaning program.
Troubleshooting and Error Indicator
Troubleshooting
Problem Possible Cause Solution
“ADD WATER” indica-
tor is on.
No water supply. Check the main water supply pressure or
check the water supply hose is blocked or
not, adding the water pressure or cleaning
the hose necessary.
Floating ball of the water
level detecting switch is
blocked, can’t be raised
up.
Clean the water tank and the water level de-
tecting switch.
Water ows out from the
water tank.
Place the unit on the level position, not on the
slope.
Water ows out from the
water drain pipe of the
water tank.
Pull out the pipe and install back to the slot of
the water tank properly.
The unit start to enter
the ice making pro-
cess, but no water
owing in the unit,
and the “ADD WATER”
indicator ashes.
Water supplying hose
breakdown, or water ows
in very slowly.
Check the main water supply pressure or
check the water supply hose is blocked or
not, adding the water pressure or cleaning
the hose necessary.
Water pump is work-
ing, but no water ow
out from the water
dividing pipe.
The little holes on the
water dividing pipe is
blocked.
Clean these little holes.
The transparency of
the ice cube is not
very good.
Water quality is bad. Change the water supply, or use the water
lter to soften or lter the water.
Ice cube shape is ir-
regular.
Water quality is not good
or the water tank is very
dirty.
Clean the water tank, and change with new
water.
The little holes on the wa-
ter dividing pipe is some
blocked.
Clean the water dividing pipe make sure all
nine holes are unclogged.
20