Klarstein 10028189 - Cleaning and Care; Drainage Instructions; Cleaning the Unit

Drainage Instructions
Manual drainage
1 When the machine stops after the water is full, turn off the machine
power and unplug the power plug.Stellen Sie den Wassertank unter
den seitlichen Ablauf.
2 Place the water container below the side water outlet behind the
body.
3 Unscrew the drainage cover and unplug the water plug, the water
will automatically ow into the water container. Keep the drainage
cover and the water plug properly.
4 During drainage, the body can be tilted slightly backwards.
5 When the water is discharged, stuff the water plug, and tighten the
drainage cover.
Continuous drainage (only applicable to cooling and dehumidication
mode)
1 Unscrew the drainage cover, and unplug the water plug.
2 Set the drainage pipe into the water outlet.
3 Connect the drainage pipe to the bucket.
Cleaning and Care
Caution:
Please move the machine carefully, so as not to spill the water in the water pan at the
bottom of the body.
Restart the machine after the water plug and drainage cover are installed, otherwise
condensate water of the machine will ow to the oor or the carpet.
Caution:
Before cleaning and maintenance, turn off the machine and unplug the plug.
Cleaning
Clean the surface
Clean with surface of machine with a wet soft cloth. Don‘t use chemicals, such as benzene, alcohol,
gasoline, etc.; otherwise, the surface of the air conditioning will be damaged or even the whole
machine will be damaged.
18