10
Dear Customer,
Congratulations on purchasing this Klarstein equipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure caused by
ignoring the mentioned items and cautions mentioned in the operation and installation instructions
are not covered by our warranty and any liability.
Contents
Technical Data 10
Safety Instructions 10
Product Description 11
Panel and Remote Control 12
Installation 13
Before rst Use 14
Use and Operation 14
Cleaning and Care 15
Troubleshooting 16
Disposal Considerations 17
Declaration of Conformity 17
Technical Data
Item number 10028190, 10028191
Power supply 220-240 V ~ 50-60 Hz
Dimensions 830 mm (H) x 443 mm (W) x 340 mm (D)
Safety Instructions
Read all the safety and operating instructions carefully and retain them for future reference.
General Instructions
• This machine is intended for household. Do not use for others.
• Use the machine in rooms, and place it in a dry environment, and do not use it outdoors.
• Do not pile items around the machine, to avoid obstructing the machine to exchange air.
• Do no place heavy objects on the machine, so as to avoid damages to the machine.
• Do not operate the machine withwet hands or in damp environment.
• Wipe the machine with a soft cloth, and do not use wax, thinner or irritating detergents.
• Clean the strainer regularly. Once every two weeks is recommended.
• For your health, do not drink the condensed water the machine discharged.
• If you don’t use the machine for a long time, unplug the power cord.
• Non-professionals do not disassemble or repair the machine without authorization.
• Do not use damaged power cord or power cord plug. Do not plug the power cord into loose outlets.
• Do not damage or use damaged power cord or power cord with unknown type.
• Before use, ensure the voltage used to meet the requirements.
• Do not attempt to modify or extend the power cord without authorization.
• Do not handle the plug with wet hands. This operation may cause an electric shock.
• When unpluging the power cord, hold the plug and then operate, and never pull the cord.
• Do not control the machine on and o state by pluging and unplugging opwer cord.
• Turn o the machine before unplugging.
To Next Page