EasyManua.ls Logo

Klarstein 10031697 - Installation of the Filter; Care and Cleaning; The Cleaning of the Grease Filter Mesh

Klarstein 10031697
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
EN
INSTALLATION OF THE FILTER
Activated carbon lter can be used to trap odors. Normally the activated carbon lter
should be changed at three or six months according to your cooking habit. Activated
carbon lter cannot be washed or recycled. Remove the lters like the picture:
1 The carbon lters are located at either end of the motor. Turn the charcoal lters
anti-clockwise until they are unscrewed.
2 Apply reverse procedure to install the charcoal lter.
CARE AND CLEANING
The cleaning of the grease lter mesh
Open the glass and take out the grease lter. Please do not use the corrosive detergent
on it. Keeping this lter clean will keep the appliance running correctly. Pls clean it strictly
follow the guidelines below:
Method 1:
Put the mesh into 40-50°C clean water, pour on detergent, and soak for 2-3 mins.
Wear gloves and clean with a soft brush. Please do not apply too much pressure, as the
mesh is delicate and will damage easy.
Method 2:
If instructed to do so, it can be put into a dishwasher, set the temperature at around
60°C.
auf
zu

Related product manuals