EasyManua.ls Logo

Klarstein 10038404 - PRODUCT OVERVIEW; Component Identification; GETTING STARTED; Initial Setup Steps

Klarstein 10038404
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
EN
PRODUCT OVERVIEW
Note: Shelves, door frame, handle and other accessories could be different
according to different models and conguration. All photos in this manual are for
reference. The appliance you buy might not be exactly the same as shown here.
Please refer to the actual product.
GETTING STARTED
1. Cleaning the compartment
Before powering the appliance on, clean the inside of the appliance and check the
drainage pipe is properly connected. (For further details, please refer to “Cleaning and
maintenance”.)
2. Let the appliance stand
Before powering it on, place the appliance on a level, rm & dry oor for at least
30minutes.
5.Labelstrip
6.Lower hinge
7.Door
8.Handle
1.Housing
2.Shelf
3.Displaypanel
4.Coverboard
10.Upperhinge
9.Doorseal

Related product manuals