EasyManua.ls Logo

Klarstein 10038404 - CLEANING AND MAINTENANCE; Cleaning Procedures; Power Cut and Long-Term Storage; Moving the Appliance

Klarstein 10038404
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
EN
CLEANING AND MAINTENANCE
Cleaning
Disconnect the appliance from the power source before cleaning.
Clean the appliance with a soft cloth or sponge and water.
Do not use organic solvents, alkaline detergents, boiling water, washing powder or
acidic liquids etc.
Do not ush the compartment of the appliance.
The items shown below will damage the surface of the wine cooler:
Power cut
Most power cuts can be resolved within a short time. To protect your wines during a
power cut, avoid opening the door as much as possible. During longer power cuts,
take the necessary measures to protect your wine.
Out of service for long time
Remove all bottles from the appliance, unplug the appliance, thoroughly clean the
inside and outside of the appliance and store the appliance safely and properly.
Note: If the appliance is disconnected or if there is a power cut, wait at least
5minutes before re-starting.
Moving the appliance
Cut off the power supply and unplug the appliance.
Remove all bottles from the appliance.
When moving the appliance, do not turn the appliance more than 45°.
Alkaline
detergent
Organic
sovents
Brushes
Boiling water

Related product manuals