EasyManua.ls Logo

Klarstein 10038404 - ASSEMBLY; Recommended Wine Temperatures; Installing the Door Handle

Klarstein 10038404
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
EN
If the wine cooler is not going to be used for an extended period of time, it is
recommended that you power it off, clean it carefully and open the door for
ventilation.
The table below shows the recommended temperature for storing and drinking
different types of wine:
Red wine 15-18 °C
White wine 9-14 °C
Rosé wine 10-11 °C
Champagne &
sparkling wine
5-8 °C
ASSEMBLY
Installing the door handle and reversing the door of the wine cooler
1. Install handle to the door frame of the appliance.
The handle is delivered in a separated
package along with the required
screws.
(1) Reveal two small holes on the
inner side of the door frame by lightly
pulling the door seal out.
(2) Aim the handle to the holes and
insert the screws from inside.
(3) Screw them up with a screw-
driver.
(4) Replace the door seal to cover
the screws.

Related product manuals