Klarstein alchemist - Valve adjustment

43
EN
TABLE 2: How to convert gas Source
Burners Flame Converting the
hob from LPG
to natural gas
Converting the
hob from natural
gas
Gas to LPG
Regular burners Full ame Replace the burner
nozzle according
to the guidelines in
Table 1.
Replace the burner
Nozzle according
to the guidelines in
Table 1
Saving ame Loosen the
adjustment.
Spindle (see g.7
below)
And adjust the
ame.
Loosen the
adjustment.
Spindle (see g.7
below)
And adjust the
ame.
Valve adjustment
Valve adjustment should be done with the control knob set at Burner ON saving ame
position.
Remove the knob, and adjust the ame with a tiny screwdriver (see g.7 below)
To check the adjusted ame: heat the burner at full open position for 10 minutes. Then
turn the knob into the saving setting. The ame should not extinguish nor move to the
nozzle. If it extinguish or moves to the nozzle, readjust the valves.