Klarstein Aquatica - Page 48

48
EN
Error signals
When some malfunctions come on, the appliance will show a signal to warn you:
Program light Meanings Possible Causes
Extra Drying:
Fast ickering
Longer inlet time. A ow meter, drain valve,
or pump failure. It should
be repaired by a qualied
specialist.
ECO and Extra Drying:
Light fast ickering
Not reaching required
temperature
Heating tube or thermistor
anomaly. It should be
repaired by a qualied
specialist.
Intensive:
Light fast ickering
Overow. Some element
of dishwasher leaks .
Some element of
dishwasher leaks. Contact
a qualied specialist.
Rapid and Extra Drying:
Light fast ickering
Touch button adhesion Display damage or
material defects. Contact
a qualied specialist.
Rapid, Intensive and Extra
Drying:
Light fast ickering
Communication anomaly Contact a qualied
specialist.
Rapid, Intensive,
ECO and Extra Drying:
Lights up permanently
Water tank doesn‘t get
enough water within
3 minutes
It should be added more
water until listening a
quick beep. Then press
Start/Pause button to
ensure that the machine is
working properly.
Note: If overow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overll or small leak, the water should
be removed before restarting the dishwasher.