Klarstein Libeica - Cleaning and Care

28
EN
CLEANING AND CARE
• Switch o the unit and let it cool down completely.
• Use a damp cloth to clean the stainless steel surface.
Note: Do not use abrasive cleaners, alcohol or aggressive solvents. Do not clean
the appliance by immersing it in water.
• Clean the outlet and the sealing ring with a professional brush.
• Clean the steam outlet. Make sure that it is not blocked.
• Remove the metal funnel by turning it anticlockwise. Remove the coee
grounds from the funnel. Clean the funnel with a cleaning agent and rinse it
with clean water.
• Clean all accessories with water and dry everything thoroughly.
• Clean the drip tray and the drip tray cover regularly and dry them afterwards.
• Clean the water tank regularly.
Descaling
Over time, limescale residues form inside the appliance. Descale the appliance at
least every 2-3 months.
1 Pour water and descaler in a ratio of 4:1 into the water tank until it is lled
with water up to the maximum mark. Use a household descaler for this
purpose. If you use citric acid for descaling, the ratio of water to citric acid is
100:3.
2 Secure the lter holder (without coee powder) in the brew group head (see
section 'Making espresso').
3 Press the coee button and prepare approximately 150 ml of coee (or make
3 cups of coee). Then press the steam button. The appliance heats up. Open
the steam knob as soon as the steam indicator lights up steadily. Allow steam
to escape for about 2 minutes and turn the steam knob o. Now leave the
descaler in the appliance for at least 15 minutes.
4 Repeat step 4 3 times.
5 Press the button for 2 cups of coee and repeat this step until there is no
descaler left in the appliance.