Klarstein MAX BREEZE - Exhaust Air Hose Setup

38
EN
Installation of the exhaust air hose
Only use the exhaust hose supplied
and attach the exhaust hose to the
rear of the air conditioner.
Make sure that the exhaust hose
is not kinked, as this would cause
the exhaust air to accumulate,
which could cause the appliance to
overheat.
The hose can be extended from
300mm to 1500 mm. To ensure
maximum efciency, the hose should
be as short as possible.
ATTENTION: The length of the
exhaust hose is specially adapted to
the requirements of the appliance. Do
not replace or extend the hose with
your own hose as this would cause a
malfunction.