32
EN
GETTING STARTED
Before use
1. Remove all packing material
around the unit and inside the
unit.
2. Place the appliance on a stable,
at, heat-resistant surface, at a
safe distance from objects that
could be damaged by heat. Keep
a minimum distance of 110 mm
between the mains connection
and the wall, furniture, etc.
3. Remove the protective lm from
the control panel. (This lm is
used to protect the control panel,
you can remove it or leave it on
the unit.)
4. Clean all accessories and clean
the interior of the appliance. Dry
the accessories completely before
putting them back into the unit.
5. Before plugging in the mains
plug, make sure that the voltage
indicated on the rating plate
of the appliance matches the
voltage of the socket.
6. When using the appliance for the rst time, run it at the highest setting
(230 °C) for at least 18 minutes to sterilise it and eliminate manufacturing
odours. The unit may emit odours or smoke from the protective lm.
To Next Page
Loading...
