6
FUNCTION BUTTONS
ON/OFF
Press the Power button
4
to power on the meter. Long press the
Power button to power off the meter.
AUTO-POWER OFF
Auto power-off will automatically turn off the meter after 15 minutes
of inactivity to conserve battery life. Long press the Max/Min
3
for
more than one second to disable the auto power off function. The
Auto-Power Off icon
A
will disappear from the display. Power-on
again to re-enable the auto power off function. The Auto-Power Off
icon will reappear.
HOLD
Press the Hold/Backlight button
5
to hold the current reading on the
LCD. Press again to return to normal measurement mode.
MAX/MIN
Press the MAX/MIN button
5
, and the MAX icon will appear on
the LCD with the highest reading. Press again and the MIN icon will
appear on the LCD with the lowest reading. Long press for 3 seconds
to return to normal measurement mode.
BACKLIGHT
Long press the Hold/Backlight button
5
for 3 seconds to turn the
backlight on and off
.
ENGLISH
OPERATING INSTRUCTIONS
1. Before each use, verify meter operation by measuring a known
current.
2. Open flex clamp coil lock, loop coil around wires to be measured,
and close coil lock.
3. Power on self-ranging meter, and directly read AC current in
Amps.
4. Refer to FEATURE BUTTON section to use other features such as
Hold, Max, and Min.
To Next Page
Loading...
Need help?
General
