To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools CL445 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Model | CL445 |
| Type | Clamp Meter |
| AC Current Measurement | True RMS |
| AC Voltage Range | 0 to 600V |
| Voltage Measurement | True RMS |
| DC Voltage Range | 0 to 600V |
| Resistance Measurement | Yes |
| Continuity | Yes |
| Frequency | 10Hz to 1kHz |
| Safety Rating | CAT III 600V |
| Continuity Test | Audible |
| Display | LCD |
| Battery | 2 x AAA |
| Operating Temperature | 32°F to 104°F (0° to 40°C) |
Details AC voltage measurement ranges and accuracy.
Details DC voltage measurement ranges and accuracy.
Details AC current measurement ranges and accuracy.
Details DC microamp measurement ranges and accuracy.
Details resistance measurement ranges and accuracy.
Details capacitance measurement ranges and accuracy.
Details temperature measurement ranges and accuracy.
Details frequency and duty cycle measurement ranges and accuracy.
Critical safety precautions for operating the meter.
Specific safety considerations for Non-Contact Voltage testing.
Visual indicators and their meanings on the meter's body.
Icons and symbols displayed on the meter's screen.
Instructions for powering the meter on and off.
How to use the SEL/NCV button for Non-Contact Voltage testing.
How to control the backlight and worklight features.
How to manually select measurement ranges.
How to track maximum and minimum measured values.
How to hold the current measurement on the display.
Proper procedure for connecting test leads for accurate measurements.
Guidelines for using the meter in CAT III environments.
Guidelines for using the meter in CAT II environments.
How to measure AC current using the clamp.
How to measure AC and DC voltage.
How to capture and measure inrush current for motors.
How to perform continuity tests on circuits.
How to measure DC current in microamp ranges.
How to measure resistance in circuits.
How to measure AC voltage and amperage simultaneously.
How to measure capacitance of components.
How to perform diode tests.
How to measure frequency and duty cycle.
How to measure temperature using the K-Type thermocouple.
Step-by-step guide for replacing the meter's batteries.
