6
ENGLISH
CLEANING
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth.
Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when the tester is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the tester to
return to normal operating conditions before using.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
BATTERY REPLACEMENT
When the Low Battery Indicator
D
is blinking
, the batteries must be
replaced.
1. Loosen screw
12
and remove battery door
11
.
2. Remove and recycle 3 spent AAA batteries.
3. Install 3 new AAA batteries, noting proper polarity.
4. Replace battery door and tighten screw securely.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Previous Page
Loading...
