To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools HVNCVT1 and is the answer not in the manual?
General| Type | Non-Contact Voltage Tester |
|---|---|
| Voltage Range | 12V to 1000V AC |
| Detection Method | Non-contact |
| Frequency | 50-500Hz |
| Safety Rating | CAT IV 1000V |
| Batteries | 2 x AAA |
| Weight | 1.6 oz (45 g) without batteries |
| Display | LED Indicator |
| Application | Detects Voltage Without Contact |
| Special Features | Pocket Clip |
| Drop Protection | 6.6 ft (2 m) |
Explains safety symbols like Warning, Risk of Electrical Shock, and Double Insulated.
Outlines various uses of the tester, such as detecting live AC voltage and finding cable faults.
Explains the low-range and high-range modes and their indicator LEDs.
Details the procedure for turning the tester on/off and its initial feedback.
Describes how to perform a self-test to check battery and system integrity.
Explains how to activate and use the low-range setting for voltage detection.
Details how to activate and use the high-range setting, including hot stick requirements.
Explains how to use the tester to locate faults within flexible cables.
Provides crucial safety distances based on voltage levels from OSHA tables.
Details required PPE based on NFPA 70E standards for different hazard levels.
Step-by-step guide for replacing the tester's 9V battery.
Instructions on how to clean the tester safely without damaging it.
Recommendations for storing the tester when not in use for extended periods.
Guidance on proper disposal and recycling of the equipment and its accessories.
