To Next PageTo Next Page
Need help?Do you have a question about the Klein Tools ET600 and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Type | Non-Contact Voltage Tester |
| AC Voltage Detection | Yes |
| Display Type | LED |
| Pollution Degree | 2 |
| Safety Rating | CAT IV 600V |
| Battery | 2 x AAA |
| Auto Power Off | Yes |
| Low Battery Indicator | Yes |
| Measurement Functions | AC Voltage |
| Max Voltage | 600V AC |
| Frequency | 50/60 Hz |
| Operating Temperature | -10°C to 50°C |
| Altitude | Up to 2000m |
| Drop Protection | 2m |
Meter's intrinsic uncertainty based on EN61557 standards.
Effect of external factors on meter uncertainty per EN61557.
Proper connection of test leads to the meter for accurate results.
Safe use of test leads in CAT III/IV environments with shields.
Detailed steps for performing insulation resistance tests on circuits.
Using the Lock feature for continuous, hands-free insulation testing.
How to measure AC and DC voltages using the meter.
How to measure resistance values using the meter's auto-ranging feature.
Steps for replacing the meter's batteries when the low battery indicator appears.
Procedure for replacing a blown fuse in the meter.
