Klein Tools ET40 - User Manual

ENGLISH
1.
Power On/Off Button
2.
Power On / Low Battery Indicator
3.
Voltage Level Indicators
4.
DC Polarity Indicators (AC when both illuminated)
5.
Hazardous Voltage Indicator
6.
Test Leads
7.
Battery Compartment Door
8.
Battery Compartment Screw
9.
Pocket Clip
10.
Test Lead Holders
NOTE: There are no user-serviceable parts inside tester.
1.
Botón de encendido y apagado
2.
Indicador de encendido y batería baja
3.
Indicadores de nivel de voltaje
4.
Indicadores de polaridad de CD (CA cuando ambos están encendidos)
5.
Indicador de voltaje peligroso
6.
Cables de prueba
7.
Tapa del compartimento de las baterías
8.
Tornillo del compartimento de lasbaterías
9.
Clip de bolsillo
10.
Soportes para cables de prueba
NOTA: El probador no contiene en su interior piezas que el usuario pueda
reparar.
ESPAÑOL
1.
Bouton marche/arrêt
2.
Indicateur de mise sous tension/piles faibles
3.
Indicateurs de niveau detension
4.
Indicateurs de polarité c.c.(DC) (c.a. [AC] lorsque les deux sont allumés)
5.
Indicateur de tension dangereuse
6.
Fils de test
7.
Couvercle du compartiment à piles
8.
Vis du compartiment àpiles
9.
Agrafe pour poche
10.
Porte-fils de test
REMARQUE: Ce testeur ne contient aucune pièce réparable par
l’utilisateur.
FRANÇAIS
1
7
9
8
10
6
2
5
3
4
Symbols on tester / Símbolos del probador / Symboles sur le
testeur
Warning – Risk of electric shock / Advertencia: riesgo de choque
eléctrico / Avertissement – Risque d'électrocution
Risk of danger. Important information: It is important that users
of this tester read, understand, and follow all warnings, cautions,
safety information, and instructions in this manual before operating
or servicing this tester. Failure to follow instructions could result in
death or serious injury.
Riesgo de peligro. Información importante: Es importante que
el usuario de este probador lea, comprenda y respete todas las
advertencias, precauciones, instrucciones e información de seguridad
incluidas en este manual, antes de poner en funcionamiento el
probador o de realizarle servicios de mantenimiento. No seguir estas
instrucciones puede dar lugar a lesiones graves o mortales.
Risque de danger. Information importante: Il est important que
les utilisateurs de
ce testeur lisent, comprennent et suivent tous
les avertissements, mises en garde, informations de sécurité et
instructions donnés dans le présent guide avant de faire fonctionner
ou de réparer ce testeur. Le non-respect pourrait entraîner des
blessures graves, voire la mort.
Read instructions /Lea las instrucciones / Lire les instructions
Double insulated / Doble aislamiento / Double isolation
AC Voltage / Voltaje CA / Tension c.a.
DC Voltage / Voltaje CD / Tension c.c.
COM
Negative Lead Input / Entrada de conductor negativo / Entrée négative
pour fil
Positive Lead Input / Entrada de conductor positivo / Entrée positive
pour fil
ET40
Electronic AC/DC Voltage Tester – Instructions
Probador electrónico devoltaje CA/CD – Instrucciones
Testeur de tension c.a./c.c. électronique– Instructions

Summary

Product Identification and Safety Symbols

Tester Components

Lists and identifies each numbered component of the Klein Tools ET40 voltage tester.

Safety Symbols and Indicators

Explains the meaning of various safety symbols and voltage/polarity indicators on the tester.

Critical Safety Information and Precautions

General Hazard Warning

Emphasizes the importance of reading and following all warnings and instructions to prevent injury or death.

Hazardous Voltage Indicator

Details the conditions under which the hazardous voltage indicator illuminates for AC and DC voltages.

General Specifications and Warnings

General Specifications

Provides technical details on operating conditions, standards, and physical attributes of the tester.

Pre-Use Safety Warnings

Outlines critical safety warnings and precautions to follow before and during tester operation.

Operating Instructions and Maintenance

Operating the Tester

Explains how to power on/off, measure voltage, and interpret indicators, including voltage limits.

Battery Replacement

Provides step-by-step instructions for safely replacing the tester's batteries.

Cleaning and Storage

Details recommended procedures for cleaning and storing the voltage tester.

Disposal and Customer Service

Disposal and Recycling

Advises on proper disposal and recycling of the equipment according to local regulations.

Customer Service Information

Provides contact details for Klein Tools customer support.

Klein Tools ET40 Specifications

General

Type	Digital Multimeter
Resistance (Ohms)	0.1Ω to 40MΩ
Continuity	Yes
Diode Test	Yes
Auto Power Off	Yes
Voltage Range AC	600V AC
Voltage Range DC	600V DC
Display	LCD
Battery	2 x AAA
Special Features	Data Hold
Standard	CAT III 600V